Product Description

This 3- in-1 soil moisture meter is designed to better know the condition of your plant, monitor the soil moisture, help you control the soil ph acidity and see if plant gets sufficient sunlight to make plants grow healthie

Specifications:
pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline)
Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)
Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh)
Probe length: 7.0 inches
Distance between probes: 0.4 inch.
Copper probe diameter: 5 mm.
Aluminum probe diameter: 5 mm

How to Use:
Step 1: Switch to moisture/pH/light position according to demand
Step 2: Insert the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: Check moisture/pH/light level in the dial after 10 minutes
Step 5: Remove probe from soil and wipe clean after each use

Active Tips
1. Don’t insert the probe against stone or very hard soil in case to damage the probe
2. Please wipe and clean the probe after each time using
3. Don’t leave the meter in the soil for a long time
4. Designed for testing soil, don’t use it to test pure water or other liquids
5.The indicator will not move If the soil is too dry, please water the plant first and test again later
6.The probe should be inserted in the soil about 6 inch or more than 2/3 part(about 15cm) ,the recommended waiting time for reading is around 3 to 5 minutes.

Product Features

• 3-in-1 Function: Test soil moisture, pH value and sunlight level of plant with our Soil meter, quickly helps you specialize in grasping when you need to water your plant, control the pH value in the soil and know about whether it gets adequate sunlight.
• Accurate and reliable: Premium Double-needle Detection Technology strongly enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity, refuse to be a killer of plants, promote plant growth in a healthy way.
• Easy to Use: The plant moisture meter with light & pH test function don’t need batteries,so you can use it indoor or outdoor. Insert the probes into the soil around 2-4inches, then toggle switch to tester what you want to measure.
• Indoor/Outdoor Design: It’s lightweight and Portable design, convenient for indoor and outdoor use.
• Accurate Reading: pH Range: 3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline), Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet), Relative Light: 0-2000lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 High).After a while, you will get a accurate data.