Product Description

Specifications:
Color: Green
Product size:60*40*260mm
The length of the probe:170mm
The weight：100g
pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline)
Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)
Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh)

Method of use:
1、Use fine sandpaper to lightly sand the probes and keep it clean and dry and then use.
2、Switch to moisture/pH/light position according to demand.
3、Insert the probe into the soil about 3-4 inches.
4、Adjust the position of the probe until the pointer on the dial swing slightly.
5、Check moisture/pH/light level in the dial after 10 minutes.

Matters needed attention:
1. Do not force it into very hard soil or touch hard objects since the probe would be easily damaged.
2. Do not use it to test pure water or other liquids. It can only be used to measure soil.
3. Don’t leave it in the soil for too long time，or it may damage the probe.
4. Please wipe and clean the probe after each time use.
5. If the soil is too dry, the indicator will not move, water it before testing.

Product Features

• Easy To Use: Push the probe down fairly deeply into the soil, so you get a good reading of what the moisture/pH/light level is near the plant’s roots, works well and it’s easy.
• 2019 New Designed: Work superbly in Garden, Lawn, Farm, Indoor & Outdoor, both soil-less mixtures and soil grown plants. compact and portable, just plug and read.
• Save Money: 3 in 1 Moisture, Light & pH Meter work for flower Plant and vegetables, let you know when to water, control pH level in soil and determine if plant getting adequate light.
• Tips: 1.the instructions and watering tips are printed on the back of the included pamphlet. 2. Please do not touch the stone or hard rock soil and watering the soil before testing the PH.
• 3.Please keep in the soil for 10 minutes or more to make sure you get a stable and accurate reading. 4. Please do not use it to test any liquids. 5. Please clean and wipe the probes after using.