Product Description
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
Main technical parameters:
1. Outflow tube hole diameter 5mm, length 100mm;
2. Water value 15±0.5s;
3. Sandwich volume cup has a capacity of 500ml at one end and 200ml at the other end.
NA-1 mud sediment concentration measuring instrument: it is determined by the volume change of the mud filtered through the screen, expressed by the percentage,
1. The mud is charged to the mark on the measuring tube marked with the word “mud”, plus Clear water to the line where there is “water”, block the nozzle and shake it;
2. Pour the mixture into the filter cartridge, discard the liquid passing through the sieve, add water to the test tube, shake it, and then pour it into the filter cartridge, repeat until the tube is clean;
3. Rinse the sand obtained on the screen with clean water to remove residual mud;
4. Insert the funnel into the filter cartridge, then slowly flip it over and insert the funnel into the tube. Wash all the sand attached to the screen with water into the tube;
5. After the sand is precipitated, read the percentage of sand;
6. Clean and dry the instrument and put it into the box. Main technical parameters: structure and technical data The NA-1 mud sand meter consists of a filter cartridge with a 200 mesh screen and a funnel with a diameter corresponding to the filter cartridge and a glass tube with a scale of 0 to 100%. The scale on the tube is 0.5% for each cell below 15%, and 1% for each cell between 15% and 30%
Product Features
- ★The Slurry Test Kit Model is a field portable kit designed for measuring the properties of slurries formulated in the field. The NB-1 mud hydrometer is used to measure the weight of the mud in the well or in the laboratory, in g/mm3. This kit allows laboratory quality measurements of viscosity, specific gravity/density, and sand content.
- ★All testing instruments are contained in a aluminium carrying case. The case is durable, compact, and provides convenient storage.
- ★Model 1006 Mud Viscometer: Suitable for measuring the viscosity of mud in wellsites and laboratories. It is calculated in seconds from the time required to flow 500mm3 of mud from the viscometer.
- ★Marsh Funnel and Viscosity Cup The Marsh Funnel and Viscosity Cup give an accurate measure of the drilling fluid viscosity.Sand Content Kit This test kit measures the percentage of sand (by volume) suspended within the drilling fluid.
- ★It is a balance with unequal arms. Its lever knife edge rests on the seat that can be fixedly mounted on the workbench. The left side of the lever is a scaled travel code device. The moving code can directly read the mud weight on the scale. The balance of the lever can be indicated by the horizontal bubble at the top of the lever.
