Product Description
iPower T5 system delivers performance, flexibility & High Lm output in any growing environment. By combining high-efficiency aluminum reflector with energy-efficient/high-output T5 bulbs & put out double the energy of normal fluorescent systems. Installation Instructions/> 1install the two foot bars onto the vertical leg bars perpendicularly. Align the center of the foot bar to the end of the leg bar with the tapped screw hole. Secure the foot bars to the vertical leg bars with the two 4mm hex bolts with the Allen wrench provided. 2Set the crossbar on a sturdy flat surface with the square slots facing up. With the foot bar attached, slide the other end of the leg bar into the crossbar. Be sure that the leg bars are seated firmly into the crossbar. 3stand the structure up. We recommend positioning it over a chair or other elevated surface in preparation for hanging your light fixture. 4Set the light fixture under the crossbar as shown in figure & pull down the hanger cables. Attach the hanger clips on the T5 fixture to the rings on the adjustable cables. 5you may adjust the height of the light fixture by adjusting the length of cord at the center of the crossbar, & setting the height by securing the locking mechanism against the crossbar.
Product Features
- Perfect for indoor plants: light system for starting seeds, propagating cuttings and growing indoor flowers and houseplants
- Premium quality: UL-listed fluorescent fixture with wide reflector and one T5 bulb provides maximum coverage; good choice for your DIY greenhouse, hydroponic system and indoor gardening
- Easily adjustable and sturdy: feather-touch height-adjustment mechanism raises or lowers fixture easily, whole frame is made of metal and very sturdy
- Energy efficient: high output full daylight spectrum bulb and super reflective internal finish, 6′ Grounded cord with on/off switch
- Measures approximately 25 by 18-1/2 by 30 Inch, Super easy assembly, : 1 year