Product Description
PPF: 325 μmol/s
Efficacy:2.7 μmol/J
Max Yield: 2.5 Lbs/six lights
Power Consumption: 130W (1.18A110VAC/0.54A240VAC)
LEDs Watt:2000W
LEDs: 360 pcs (216pcs 3500K white LEDs, 136pcs Wideband Full RED LEDs, 8pcs UV LEDs)
LED Chip: SANAN 2235*2 (Almost 2 times bigger than LM301B)
Input power: 100-240VAC 50/60Hz
Power Factor: >0.9
Light Spectrum: 380nm~800nm full spectrum including 450nm/660nm/730nm
Light B:GY:R:FR (Flower Booster Switch OFF): 16%:45%:35%:2%
Light B:GY:R:FR (Flower Booster Switch ON): 11%:29%:50%:8%
Light Best For: flowering and fruiting plants during growth and flower stage
Light Mounting Height: 12-20in above canopy
Light PPFD (μmol/ m²/s ) (stage: h=mounting height A=canopy coverage ):
300 μmol/m²/s (Vegetative: h=16in A=4X1ft)
440 μmol /m²/s (Flower: h=12in A=4X0.5ft)
Light Operating Temperature: -20℃ t0 40 ℃
Light Operation place: indoor
LED chip soldering pad temperature: 70℃ (at room temperature 28℃)
Power Driver: aluminum housing and Thermal sealant
Warranty: 3 Years
Light Net Weight: 2.8kg , 6.17lbs
Light Dimension(inch): 39.4(L)x3.1(W)x3.5(H)
Product Features
- CMH²PS FULL SPECTRUM: We use 3500k white light as seedling and VEG spectrum (B:GY:R:FR=15%:45%:35%:2%), this spectrum is same as CMH/CDM on RGYB rate . When Flower Booster Switch ON, this spectrum(B:GY:R:FR=11%:30%:50%:8%) get more red and far-red light , this spectrum is same as HPS on RGYB rate . Professional growers know that CMHCDM is great at the seedling and VEG stage, and HPS is able to ensure a very good harvest.
- High PPF efficiency Design: Our light get 2.7µmol/J PPF efficacy even it get 50% R, and CMHCDM is 1.6 µmol/J, DE HPS is only 1.8µmol/J.We use SANAN 2235 dual chip , it’s chip area is almost twice the size of Samsung LM301B, and consume only 130W with 360 LEDs , and we use only 1% light decay nano-waterproof coating. All of these will let grower get 40% higher yield compare to old LED grow light.
- Uninterrupted Actual Planting Test: We set up some grow tents in our factory , we test our lights with pepper planting from germination to fruit . Using CMH and DE HPS to grow together , constantly adjust spectrum and efficacy with our led light , try to design best led grow light .
- FOOTPRINT : In veg stage , 4X4ft just need 3pcs this lights , hanging 20in from the plant. In Flower stage, 4X4ft need 4-6pcs this lights , hanging 20in from the plant, and the harvest will very cost to best 1000W HPS. It must be noted that if you want to get a good harvest, try to keep your grow room at a temperature between 68°F and 86°F , especially in winter, because the heat of LED light is low.
- MOST SAFE LIGHTS: Power drive is the core guarantee for long-term reliable operation of LED plant growth lamps. With many years of experience in LED power supply development, we know that the control device is in a low temperature and moisture proof state. It is a guarantee for stable and long life of the LED power supply, and it is also a guarantee to avoid fire when the power supply fails. Aluminum shell filling thermal adhesive is our standard for plant lamp power supply, which can meet the r