Product Description
When designing your raised garden bed use anchor brackets for your base layer when creating a long garden (more than two boards long on any side) or live in a climate where frost pushout is a concern. The saw-toothed barbs along the stake secure your raised garden or garden edging to the ground and are strong enough to resist frost-heave. Anchor brackets are especially useful for landscape borders which are generally long runs of boards that don’t connect into a loop or square. The barbed stake will stabilize your edging against frost pushout or from being loosened by mowers or any human disturbance.
You can only use anchor brackets on the base layer of your garden. If your design calls for additional layers you will use 1” Stacking Brackets to connect your additional layers.
Our Raised Garden Bed Anchor and Stacking Brackets pivot 270 degrees, allowing endless design options. Create unique designs like diamonds, zig zags, or traditional right-angle designs.
You can also install your raised garden bed on hard surfaces like patios, rooftops and decks. For hard surface installs, simply use a hacksaw to remove the barbed stake section below the bracket. You may want to line the bottom of your raised bed with landscape fabric to make it easy to clean up later and to help prevent staining and dirt loss in these types of installs.
Each 2-pack represents two complete corners or connections. For a 4’ x 4’ raised garden bed you will need two 2-packs.
Product Features
- 1” Anchor Bracket can be used with any 1” Frame It All 5.5” high composite raised bed board or 1” dimensional lumber
- Prevents frost-heave
- Extends 11.5” into the ground
- Durable ABS plastic
- Attaches to board easily with a screwdriver (hand or power)
- UV and temperature resistant
- Five-year warranty
